1.1 Contents and purpose

The purpose of this manual is the safe and efficient mounting and commissioning of the ES PROLINE sliding door operators (hereinafter also called "operator").

Before commencing any work, personnel must have carefully read through and understood this manual. Complying with all safety instructions and action steps provided in this manual is the basic prerequisite for safe working. The figures serve to provide a general understanding and may differ from the model of the sliding door that is actually delivered.

1.2 Target group

This manual is designed for use by qualified assembling technicians. Thanks to their professional training and experience, as well as their knowledge of technical terminology and the relevant standards and regulations, a qualified assembling technician is able to mount and commission the operator and to independently detect and avert possible dangers.

The assembling technician has knowledge and experience in the following areas:

• Industrial safety, operational safety, and accident prevention regulations
• Using ladders and scaffolding
• Handling and transport of long, heavy parts
• Using tools and machinery
• Attachment of fixing materials
• Assessment of the building fabric

1.3 Other applicable documents

• Documentation for the profile system used
• Documentation for accessories used
• Inspection log for power-operated doors
• The risk assessment for the project

1.4 Documents storage

This manual and the applicable documents must be kept during the service life of the product and must be passed on with the product.

1.5 Abbreviations

Dimensions:

OL

Operator length

CH

Clear height

CW

Clear width

Location information:

MCE

Main closing edge

SCE

Secondary closing edge

Parts:

EM I/O

Input/Output extension module

EM BAS

Operating mode switch extension module

EM SIAK

Safety and activation extension module

CIN

Communication interface

1.6 Symbols used

1.6.1 Hazard categories

1.6.2 More symbols

2.1.

Step-by-step graphics

12

Position numbers of parts

2.1 Intended use

ES PROLINE sliding door operators are suitable for use in dry environments. The escape route variant is suitable for use on escape and emergency routes.

2.2 Improper use

The use of control elements, settings or procedures not described in this documentation may cause electric shocks, hazards posed by electrical voltages/currents, and/or hazards posed by mechanical processes.

2.3 Reasonably foreseeable misuse

Any mounting above and beyond the correct mounting is considered to be incorrect mounting.

2.4 Risk assessment

The assembling technician ensures that the results of the risk assessment are complied with. The assembling technician carries out their own inspection and flags up any unresolved hazards.

2.4.1 Special protection requirements with regard to particularly vulnerable people

Insofar as the risk assessment results in an unacceptable impact for a door user, in terms of a health risk or a risk of injury, protection must be added in the form of a safety device (connecting a safety sensor or mounting a protective panel). This is to be taken into special consideration if particularly vulnerable persons (e.g. children, elderly people or disabled people) use the door area.

2.5 Basic warnings