3. Product Description
3.1 Overview
Figure 1: Component Overview
The following list details the main components of the operator system:
- 1 Carriers
- 2 Engaging unit
- 3 Operator profile
- 4 Battery
- 5 Toothed belt
- 6 Mounting profile
- 7 LM girder
- 8 End stop
- 9 Locking device
- 10 DRIVE UNIT
- 11 End plate
- 12 Logo clip
- 13 Cover holders
- 14 Internal cover
- 15 Connector (control unit to extension module)
- 16 Extension module
- 17 CIN (option)
- 18 Cable duct
- 19 Hinge profile
- 20 Deflection device
- 21 Rubber strip
- 22 Track profile
- 23 Counter roller
- 24 Anti-static brush
- 25 Adjustable brackets
- 26 Carriers with engaging unit for 1-leaf units
- 27 Bag of screws (17508901150 for 2-leaf, 17509001150 for 1-leaf)
3.2 Operating Elements
The control unit features a user interface equipped with 4 keys and a 2-digit display (Figure 2). The keys enable the following functions:
Right Key
- Open parameters menu
- Display parameter value
- Select parameter to be changed
- Save changed parameter value
- Open error menu
Bottom Key
- Scroll through parameters and error messages
- Decrease the parameter value
- Opening impulse
- Teach-in run (press for 3 secs)
- Factory reset (Fact-Setup) (press for 8 secs)
Left Key
- Close change parameters
- Close parameters menu
- Close error menu
- Stop service mode (press for 3 secs)
Top Key
- Scroll through parameters and error messages
- Increase the parameter value
Left + Right Key (Simultaneously)
- Error acknowledgement
- Reset (press for 3 secs)
3.3 Parts Included
The parts included are stated on the delivery note. Note that fixing materials such as dowels and screws are not included unless specified.
3.4 Technical Data
| Connection voltage | 230 V 50 Hz +10%/-15% |
|---|---|
| Fuse (supplied by customer) | 10 A |
| Protection class | IP 20 |
| Permissible humidity | 93% relative humidity, non-condensing |
| Operating temperature | -20°C to +60°C |
| Power supply for external devices (mains) | 24 V DC / max. 2 A short-circuit-proof |
| Power supply (battery mode failure) | 21–27 V DC / max. 2 A short-circuit-proof |
| Multiport inputs | 24 V ±15% |
3.5 Closing Edge Protection
Warning
Only safety sensors with type approval according to EN 16005 may be used!
3.6 Secondary Closing Edge Protection
If the distance of the opened door leaf to a stationary obstacle (e.g., a wall) is smaller than 200 mm, the secondary closing edge must be protected, for example with safety sensors or a protective panel.