News

Dorma ED50/ED100/ED250 Narrow Header Installation Guide

Mar 14, 2026

Next section

Next page: →
Dorma ED50/ED100/ED250 Narrow Header Installation Instructions | USA

2.10 4 x 6 Narrow Header

Fig. 2.10.1 Narrow header SA RH and LH

Configuration Table

Table 2.10.1: 4 x 6 Narrow Header Configurations
Part Number Description Finish
DS4615-01A 4 x 6 header assembly SA LH CL Clear
DS4615-01B 4 x 6 header assembly SA LH DB Dk Bronze
DS4615-01E 4 x 6 header assembly SA LH Custom Custom
DS4615-02A 4 x 6 header assembly SA RH CL Clear
DS4615-02B 4 x 6 header assembly SA RH DB Dk Bronze
DS4615-02E 4 x 6 header assembly SA RH Custom Custom
DS4615-01A 4 x 6 header assembly SA PR CL Clear
DS4615-01B 4 x 6 header assembly SA PR DB Dk Bronze
DS4615-01E 4 x 6 header assembly SA PR Custom Custom

Hardware Parts

Table 2.10.2: 4 x 6 Narrow Header Hardware
Item Part Number Description Qty LH (-01x) Qty RH (-02x) Qty PR (-03x)
1.1 DC4600-01x 4 x 6 header SA LH 1 - -
1.2 DC4600-02x 4 x 6 header SA RH - 1 -
1.3 DC4600-03x 4 x 6 header SA PR - - 1
2.1 DC4610-01x 4 x 6 cover 1 1 -
2.2 DC4610-03x 4 x 6 cover, PR - - 1
3 DC4605-010 4 x 6 header track 2 2 4
4 DC4690-01C End cap, operator header switch 2 2 2
5 DC4692-01C Cover, blank 1 1 1
6 DF0204-01B #5 flat head sheet metal screw, black 2 2 2
7 DF0207-01B 1/4-20 x 5/8" self tapping screw, black oxide 6 6 7
8 DK4672-001 Kit, ED 4 x 6 jamb bracket - - 1
Fig. 2.10.2 Narrow header SA RH exploded view
Fig. 2.17.3 Narrow header SA pair and exploded view

2.11 ED50/ED100/ED250 Operators

Fig. 2.11.1 ED50 operator & Fig. 2.11.2 ED100/ED250 operator
Fig. 2.11.3 Accessory terminals, guide pin
  • 11: Terminals for accessory wiring
  • 12: Bag containing terminals and third guide pin (Included with operator)
  • 13: Guide pin

2.12 Screw Packs

  • 8.1: #12 x 2.5 RHWSP
  • 8.2: 1/4-20 x 1.5 PHSLFP
  • 11: 1/4-20 x 1" FHMSP (flat head machine screw, Phillips)

Hearder mounting screw pack: DK4608-010

Fig. 2.12.1 Mounting plate screws
Fig. 2.12.2 Header mounting screw pack

2.13 Axle Extensions, ED50/ED100/ED250

Item Description Part Number Size Reference
1 20 mm axle extension DC4679-001 3/4"
2 30 mm axle extension DC4679-002 1 1/8"
3 60 mm axle extension DC4679-003 2 3/8"
4 90 mm axle extension DC4679-004 3 9/16"

2.14 Push Arm Door Stop - Option

Fig. 2.14.1 Door stop assembly DS4633-001
  • 2: 1/4" thick base plate DC4633-001
  • 3: Rubber bumper DC4633-003
  • 4: Shoulder screw DC4633-004
Fig. 2.14.2 Mounting screw kit DC4633-005
  • 5.1: 1/4 x 1 1/4" Phillips FHS, black oxide, SS
  • 5.2: No. 14 x 1 1/4" Phillips FHS for sheet metal, zinc plated steel

2.15 Kit, ED Operator Labels

Low Energy (LE) Decal Kits

Configurations
Assembly # Description
DK3137-010 Single door low energy (LE) decal kit
DK3137-030 Pair door low energy (LE) decal kit

Hardware for LE Kits

  • 1: DD0586-010 - Decal, Automatic Caution Door
  • 2: DD0758-010 - Decal, Activate Switch to Operate
  • 3: DD0762-010 - Decal, Push to Operate
  • 4: DD0762-020 - Decal, Pull to Operate
  • 8: DD1269-040 - Safety Information label, low energy
  • 9: DD3425-010 - Label, Service call

SAFETY INFORMATION - Low Energy Swinging Doors

  • Activate the door. Door should open at a slow smooth pace (4 or more seconds), and stop without impact.
  • Door must remain fully open for a minimum of 5 seconds before beginning to close.
  • Door should close at a slow, smooth pace (4 or more seconds), and stop without impact.
  • Inspect the floor area. It should be clean with no loose parts that might cause user to trip or fall. Keep traffic path clear.
  • Inspect door’s overall condition. The appropriate signage should be present and the hardware should be in good condition.
  • Have door inspected by an AAADM certified inspector at least annually.

AAADM-3044: DO NOT USE DOOR if it fails any of these safety checks of if it malfunctions in any way. Call a qualified automatic door service company to have door repaired or serviced.

Full Energy (FE) Decal Kits

Configurations
Assembly # Description
DK3137-110 Single door full energy (FE) decal kit
DK3137-130 Pair door full energy (FE) decal kit

Hardware for FE Kits

  • 1: DD0586-010 - Decal, Automatic Caution Door
  • 2: DD0739-010 - Decal, Do Not Enter, Up Arrow
  • 3: DD0739-020 - Decal, Do Not Enter
  • 4: DD0758-010 - Decal, Activate Switch to Operate
  • 5: DD0762-010 - Decal, Push to Operate
  • 6: DD0762-020 - Decal, Pull to Operate
  • 7: DD1269-040 - Safety Information label, low energy
  • 8: DD1269-020 - Decal, AAADM Safety
  • 9: DD3425-010 - Decal, Service Call
  • 10: DD0756-020 - Decal, Automatic Door, Up Arrow
  • 11: DD0756-010 - Decal, Automatic Caution Door

SAFETY INFORMATION - Automatic Swinging Doors

  • Walk toward the door at a normal pace. The door should open when you are about 4 feet from the door.
  • Stand motionless on threshold for at least 10 seconds. The door should not close.
  • Move clear of the area. The door should remain open for at least 1.5 seconds and should close slowly and smoothly.
  • Repeat steps 1 through 3 from other direction if door is used for two way traffic.
  • Inspect the floor area. It should be clean with no loose parts that might cause user to trip or fall. Keep traffic path clear.
  • Inspect door's overall condition. The appropriate signage should be present.
  • Have door inspected by an AAADM certified inspector at least annually.

AAADM-2496: DO NOT USE DOOR if it fails any of these safety checks. Call a qualified automatic door service company.

2.16 Mode and Exit Only Switch Panel

Mode Switch Kits and Cables
Kit # Description Cable Length
DX4604-04C Kit, Mode Switch, RJ45 3 Ft FRC 3' [914 mm]
DX4604-05C Kit, Mode Switch, RJ45 10 Ft FRC 10' [3048 mm]
DX4604-06C Kit, Mode Switch, RJ45 20 Ft FRC 20' [6096 mm]
DX4604-09C Kit, Mode Switch, RJ45 6 Ft FRC 6' [1829 mm]

Tips and Recommendations: For wiring diagrams, reference Appendix C.

2.17 Optional Key Switch Panels

  • 2: Key switch panel, RJ45, DX4604-21C
  • 3: Key switch panel, DX4604-11C

RJ45 Communication Cable for Key Switches

Item # Length
DX4662-001 3' [914 mm]
DX4662-002 10' [3048 mm]
DX4662-003 20' [6096 mm]

2.18 Hole Plug Kit

Part Number: DK4620-010

  • 12: 1 1/2" hole plug
  • 13: 3/8" [10 mm] hole plug

Arm Kits and Cables

2.19 Push Arm Kits

  • 1: Standard push arm - DC4677-01X (Kit: DK4709-01X)
  • 2: Deep push arm - DC4677-02X (Kit: DK4709-02X)
  • 3: Screw kit - DK2719-010

2.20 Pull Arm Kits

  • Fig 2.15.1: Pull arm kit, DK4709-11X (Includes Pull arm DC4678-01X)
  • Fig 2.15.2: Deep pull arm kit, DK4709-12X (Includes Deep pull arm DC4678-02X)
  • 3: Screw kit - DK2719-020

2.21 Arm Screw Kits

Push arm screw kit DK2719-010 / Pull arm screw kit DK2719-020

  • 9.1/10.1: 10-24 x 1 1/2" barrel nut (DF2718-01Z)
  • 9.2: 10-24 x 1/2" PPHMS (DF3278-01Z)
  • 10.2: 10-24 x 1 1/4" FHSCS (DF2717-01Z)

2.22 Double Door ED50/ED100/ED250 Operator Cables

Sync Cable
Item # Length Note
DX3485-030 80" [2030 mm] Standard
DX3485-010 9 7/8" [250 mm] Optional
DX3485-020 40 1/2" [1030 mm] Optional
Power Connect Cable
Item # Length Note
DX3484-030 119 5/8" [3400 mm] Standard
DX3484-010 68 7/8" [1750 mm] Optional
DX3484-020 94 1/2" [2400 mm] Optional
Tags: AAADM Safety Decals, Axle Extensions, Door Operator Parts, Dorma ED 100, Dorma ED 250, Narrow Header Installation, Push Arm Kit, Swing Door Opener
Previous
Dorma ED100 & ED250 SA Full Energy Installation Guide
Next
Dorma ED50/ED100/ED250 Technical Data & Installation Manual

Related Articles

BEA LZR-Flatscan SW User Guide & Troubleshooting

BEA LZR-Flatscan SW User Guide: Setup & Config

BEA LZR-Flatscan SW Installation Guide: Mounting & Wiring

BEA LZR-FLATSCAN SW Safety Sensor User Guide

Leave a Comment

Your email address will not be published.