News

GEZE ECdrive T2 Automatic Linear Sliding Door System

Next section

Next page: →
GEZE ECdrive T2 | Automatic Linear Sliding Door System Product Sheet

Product Description

With its streamlined design, the ECdrive T2 guarantees new design possibilities and an outstanding price-performance ratio. Energy efficiency is additionally improved in conjunction with the GCprofile Therm profile system.

Areas of Application

  • Single and double leaf sliding door systems
  • Interior and exterior doors with high access frequency
  • Complete solution for entrance areas with GCprofile Therm and fanlight
  • If extra impermeability or energy efficiency are needed
  • Opening widths from 700 to 3000 mm possible
  • Door leaf weight of up to 140 kg per leaf
  • Suitable profile systems are fine-framed profile systems with insulating and MONO glass, GCprofile Therm, toughened safety glass clamping profile, on-site frame and wooden leaves

Product Features

  • Slim design with a cover height of just 100 mm for greater creative freedom
  • With double roller carriage and GCprofile Therm up to 140 kg leaf weight
  • Efficient installation thanks to pre-drilled tracks and elongated holes
  • Full floor guide available for controlled diversion of rainwater
  • Integrated cable routings make cable laying easier
  • Can be networked, and integrated into the building automation via open standard (BACnet)
  • Independent error recognition and recording
  • Freely configurable inputs and outputs for different functions
  • Integrated battery for emergency opening and closing in the event of a power failure
  • Self-cleaning roller carriage reduces maintenance effort and costs
  • Various mechanical and electrical locks are optionally available
  • Service interface for easy maintenance

Technical Data

Specific technical attributes of the ECdrive T2 system.
Product Name ECdrive T2
For 1-leaf door systems Yes
For 2-leaf door systems Yes
Fine-framed insulating glass Yes
MONO glass fine-framed Yes
ESG clamping profile Yes
Framed leaf (on site) Yes
Wooden leaf (on site) Yes
Height 100 mm
Depth 190 mm
Leaf weight (max.) 1-leaf 140 kg
Leaf weight (max.) 2-leaf 140 kg
Opening width 1-leaf 700 mm - 3000 mm
Opening width 1-leaf with GCprofile Therm 1500 mm
Opening width 2-leaf 900 mm - 3000 mm
Opening width 2-leaf with GCprofile Therm 3000 mm
Service temperature -15 - 50 °C
IP rating IP20
Disconnection from mains Main switch in the drive
Standard conformity DIN 18650, DIN EN ISO 13849: Performance Level D, EN 16005

Drive Components

Designation Description Ident-No. Colour Dimensions
ECdrive T2 drive * Drive system for linear sliding doors in high traffic areas 180374 - 230 V (Supply), 100 x 190 mm
ECdrive T2 drive, length: 2100 mm * Drive system for linear sliding doors in high traffic areas 210298 EV1 2100 x 100 x 190 mm
ECdrive T2 drive, length: 3100 mm * Drive system for linear sliding doors in high traffic areas 210297 EV1 3100 x 100 x 190 mm
ECdrive T2 drive, length: 4100 mm * Drive system for linear sliding doors in high traffic areas 210296 EV1 4100 x 100 x 190 mm

Accessories

EFT Elbow Switch

Stainless steel elbow switch with IP65 IP rating for activating automatic doors.

Designation Description Ident-No. Colour Dimensions Type of installation
EFT elbow switch Very flat design IP rating IP65 119898 Stainless steel 75 x 250 x 17 mm Surface-mounted

KFT Elbow Switch

Plastic elbow switch, IP rating IP20, for activation of automatic doors.

Designation Description Ident-No. Colour Dimensions Type of installation
KFT elbow switch Very flat design, IP rating IP20 114077 Stainless steel colour 90 x 179 x 23 mm Surface-mounted
KFT elbow switch Very flat design, IP rating IP20 114078 White 90 x 179 x 23 mm Surface-mounted

LS 990 Elbow Switch

Elbow switch for activating automatic doors.

Designation Description Ident-No. Colour Dimensions Type of installation
LS 990 elbow switch IP rating IP30 H=223mm 128583 Stainless steel 81 x 223 x 18 mm Flush-mounted installation
LS 990 elbow switch IP rating IP30 H=223mm 128582 Stainless steel 81 x 223 x 51 mm Surface-mounted
LS 990 elbow switch IP rating IP30 H=223mm 141041 Alpine white 81 x 223 x 51 mm Surface-mounted
LS 990 elbow switch IP rating IP30 H=223mm 141042 Alpine white 81 x 223 x 18 mm Flush-mounted installation

AS 500 Rocker Push Button

Activation of all GEZE automatic doors.

Designation Ident-No. Colour Dimensions Type of installation IP rating
AS 500 rocker push button 120888 Alpine white 80 x 80 x 9 mm Flush-mounted installation IP20

GC 365 Combined Detector

Combined detector for activating and protecting automatic sliding doors with four different infrared light curtain configuration settings.

Designation Description Ident-No. Colour Dimensions Output
GC 365 R * Combined detector for the activation and safeguarding of automatic sliding doors 160283 Black 267 x 61 x 38 mm Potential-free relay contact
GC 365 SF * Combined detector for the activation and safeguarding of automatic sliding doors in escape route direction 160284 Black 267 x 61 x 38 mm Relay, frequency, voltage

GC 341 Safety Sensor

Safety sensor for automatic doors.

Designation Description Ident-No. Colour Dimensions Operating voltage
GC 341 * Safety sensor for automatic doors 160285 Black 267 x 61 x 38 mm 24 V DC

DPS Programme Switch

Display programme switch for setting the mode of operation for automatic doors.

Designation Description Ident-No. Colour Dimensions Operating voltage
Display programme switch DPS with OFF switch Configuring the mode of operation as well as commissioning and parameter setting for automatic doors / with 5x control keys, 2x7 segment display, alphanumerical fault display, IP rating IP40 151524 Alpine white 80 x 80 x 53 mm 24 V DC
DPS with OFF switch and SCT key switch In combined double frame without Euro profile half cylinder 155810 Alpine white 80 x 151 x 50 mm 24 V DC

Mechanical Programme Switch

Mechanical programme switch for setting the mode of operation for automatic doors.

Designation Description Ident-No. Colour Dimensions Operating voltage
MPS mechanical programme switch Setting of the mode of operation of automatic doors with rotary knob, LED fault display, IP rating IP40 / suitable for switch ranges with 55x55mm switch insert 113226 Alpine white 80 x 80 x 24 mm 24 V DC
MPS ST mechanical programme switch Setting of the mode of operation of automatic doors with key, LED fault display, IP rating IP40, keyed alike cylinder, incl. 2× keys / suitable for switch ranges with 55x55mm switch insert 113227 Alpine white 80 x 80 x 24 mm 24 V DC

SCT Stainless Steel

Key switch stainless steel for authorised activation and for changing the mode of operation of automatic doors.

Designation Description Ident-No. Colour Dimensions Type of installation
Key switch, switching operation without Euro profile half cylinder Mounting with claws or screws, one-sided switching operation (key can be removed in the central position), cover can only be removed with key, light alloy housing, IP rating IP54 098870 Silver-coloured 79 x 79 x 12.5 mm Flush-mounted installation
Previous
Dorma ED100: Low Energy & Power Door Operator Factsheet
Next
GEZE ECdrive T2 Accessories: Switches, Sensors & Modules

Leave a Comment

Your email address will not be published.