Next section
Next page: →
6.1 Recommended Tools
Ensure the following tools are available before starting the installation procedure (Refer to Fig. 6.1.1 in original manual).
- 1. T-handle hex key, 5 mm
- 2. Hex keys: 2.5 mm, 3 mm, 6 mm
- 3. Screwdriver, flat blade
- 4. Door pressure gauge, 0 to 35 ft-lbf
- 5. Screwdriver, Phillips, #2, #3
- 6. Torque wrench, 3 to 50 ft lb min.
- 6.1. Metric hex key sockets
- 7. Open end wrench, 13 mm
- 8. Screwdriver, flat blade, M2 (1/16 to 3/32")
6.2 Standard Tightening Torque
Use the following torque specifications for standard fasteners unless otherwise noted.
| Fastener Size | Torque (ft lb) |
|---|---|
| M5 | 3.7 |
| M6 | 7 |
| M8 | 17 |
| M10 | 34 |
| M12 | 58 |
6.3 Drill Bits
Select the appropriate drill bit size based on the fastener type and material.
| Fastener Type | Material / Condition | Drill Bit Size |
|---|---|---|
| #10 Wood Screw | Hardwood | 9/64" |
| Softwood | 1/8" | |
| #12 Wood Screw | Hardwood | 5/32" |
| Softwood | 9/64" | |
| #14 Wood Screw | Hardwood | 11/64" |
| Softwood | 5/32" | |
| 1/4 - 20 Metal Self Tapping Screw | Standard | 7/32" |
| 10-24 Barrel Nut | Standard | 5/32" |