News

GEZE Slimdrive SL NT | Automatic Sliding Door System

Next section

Next page: →
GEZE Slimdrive SL NT - Product Data Sheet

Areas of Application

  • Single and double leaf sliding door systems
  • Interior and exterior doors with high access frequency
  • Façades with slim mullion-transom constructions
  • Glass façades with the highest design standards
  • Opening widths from 700 to 3000 mm possible
  • Door leaf weights of up to 125 kg per leaf
  • Suitable profile systems are fine-framed profile systems with ISO and MONO glass, all-glass systems (GGS) and on-site frames and timber leaves

Product Features

  • Very quiet running, low-wear direct current drive with a height of only 7 cm
  • Can be networked, and integrated into the building automation via open standard (BACnet)
  • Independent error recognition and recording
  • Freely configurable inputs and outputs for different functions
  • Integrated, rechargeable battery for emergency opening in case of safety-relevant faults, such as power failure
  • Self-cleaning roller carriage reduces maintenance effort and costs
  • Various mechanical and electrical locks are optionally available

Technical Data

Product Name Slimdrive SL NT
For 1-leaf door systems Yes
For 2-leaf door systems Yes
Fine-framed insulating glass Yes
MONO glass fine-framed Yes
All-glass system (GGS) Yes
Wooden leaf (on site) Yes
Height 70 mm
Depth 190 mm
Leaf weight (max.) 1-leaf 125 kg
Leaf weight (max.) 2-leaf 125 kg
Opening width 1-leaf 700 mm - 3000 mm
Opening width 2-leaf 900 mm - 3000 mm
Service temperature -15 - 50 °C
IP rating IP20
Disconnection from mains Main switch in the drive
Standard conformity DIN 18650, DIN EN ISO 13849: Performance Level D, EN 16005

Accessories

Elbow Switches

Designation Description Ident-No. Colour Dimensions Type of installation
EFT elbow switch Stainless steel elbow switch with IP65 IP rating for activating automatic doors. Very flat design. 119898 Stainless steel 75 x 250 x 17 mm Surface-mounted
KFT elbow switch Plastic elbow switch, IP rating IP20. Very flat design. 114077 stainless steel colour 90 x 179 x 23 mm Surface-mounted
KFT elbow switch Plastic elbow switch, IP rating IP20. Very flat design. 114078 white 90 x 179 x 23 mm Surface-mounted
LS 990 elbow switch IP rating IP30 H=223mm 128583 Stainless steel 81 x 223 x 18 mm Flush-mounted installation
LS 990 elbow switch IP rating IP30 H=223mm 128582 Stainless steel 81 x 223 x 51 mm Surface-mounted
LS 990 elbow switch IP rating IP30 H=223mm 141041 alpine white 81 x 223 x 51 mm Surface-mounted
LS 990 elbow switch IP rating IP30 H=223mm 141042 alpine white 81 x 223 x 18 mm Flush-mounted installation

Push Buttons & Programme Switches

Designation Description Ident-No. Colour Dimensions Details
AS 500 rocker push button Activation of all GEZE automatic doors 120888 alpine white 80 x 80 x 9 mm Flush-mounted installation, IP20
DPS Display programme switch Display programme switch for setting the mode of operation for automatic doors with OFF switch 151524 alpine white 80 x 80 x 53 mm 24 V DC
DPS with OFF switch and SCT key switch Configuring mode of operation, combined double frame without Euro profile half cylinder 155810 alpine white 80 x 151 x 50 mm 24 V DC
MPS mechanical programme switch Setting of the mode of operation of automatic doors with rotary knob 113226 alpine white 80 x 80 x 24 mm 24 V DC
MPS ST mechanical programme switch Setting of the mode of operation of automatic doors with key 113227 alpine white 80 x 80 x 24 mm 24 V DC

Detectors & Sensors

Designation Description Ident-No. Colour Dimensions Output / Voltage
GC 365 R Combined detector for the activation and safeguarding of automatic sliding doors 160283 black 267 x 61 x 38 mm Potential-free relay contact
GC 365 SF Combined detector for activation and safeguarding of automatic sliding doors in escape route direction 160284 black 267 x 61 x 38 mm Relay, frequency, voltage
GC 341 Safety sensor for automatic doors 160285 black 267 x 61 x 38 mm 24 V DC

Key Switches

Designation Description Ident-No. Colour Dimensions Type of installation
SCT Stainless Steel Key switch Key switch, switching operation without Euro profile half cylinder 098870 silver-coloured 79 x 79 x 12.5 mm Flush-mounted installation
SCT Stainless Steel Key switch Key switch with Euro profile half cylinder and three keys 137056 silver-coloured 75 x 74 x 66 mm Surface-mounted
SCT Stainless Steel Key switch Key switch, stay-put without Euro profile half cylinder 111357 silver-coloured 79 x 79 x 12 mm Flush-mounted installation
SCT key switch 2-pin with Euro profile half cylinder, two-sided switching operation 118478 alpine white - -
SCT key switch 1 pin without Euro profile half cylinder, single-sided switching operation 117996 alpine white 80 x 80 x 11 mm Flush-mounted installation
Previous
GEZE ECdrive T2: Akcesoria i Komponenty Systemowe
Next
GEZE Slimdrive SL NT Accessories & Technical Data

Leave a Comment

Your email address will not be published.