News

GEZE Powerdrive Manual: Introduction & Safety Symbols

Next Section

Next Page: →
Introduction - GEZE Powerdrive Product Family Manual

1. Introduction

1.1 Symbols and illustrations

Warning notices

In these instructions, warning notices are used to warn against material damage and injuries.

  • Always read and observe these warning notices.
  • Observe all measures marked with the warning symbol and warning word.
Explanation of Warning Symbols and Meanings
Warning Symbol & Word Meaning
DANGER Danger to persons.
Non-compliance will result in death or serious injuries.
WARNING Danger to persons.
Non-compliance can result in death or serious injuries.
CAUTION Danger to persons.
Non-compliance can result in minor injuries.

Further symbols and illustrations

Important information and technical notes are highlighted to explain correct operation.

Additional Informational Symbols
Symbol Meaning
[ ! ] (Important note) Information to prevent property damage, to understand or optimise the operation sequences.
[ i ] (Info) Means "additional Information".

Action Symbols

Symbol for an action: This means you have to do something.
If there are several actions to be taken, keep to the given order.

1.2 Revisions and validity

Version 01: Valid for Powerdrive product family from model year 2021.

1.3 Product liability

In compliance with the liability of the manufacturer for his products as defined in the German “Product Liability Act”, compliance with the information contained in this brochure (product information and intended use, misuse, product performance, product maintenance, obligations to provide information and instructions) must be ensured. Failure to comply releases the manufacturer from his statutory liability.

1.4 Reference documents

List of Reference Documents for the Powerdrive Family
Type Name
Wiring diagram Automatic sliding doors DCU1-NT/DCU1-2M-NT
Additional wiring diagrams Automatic sliding doors DCU1-2M-NT, door controller DCU1-2M-NT for automatic sliding doors in escape routes, FR variants DUO, LL, RWS
User manual Automatic sliding door systems
Faults and corrective measures DCU1-NT/DCU1-2M-NT Drive electronics for automatic sliding doors
Cable plan Automatic sliding door systems
Safety analysis Automatic sliding doors
Pre-installation instructions Powerdrive product family

These documents are subject to change. Use only the most recent version.

Previous
GEZE Powerdrive Pre-Mounting & Safety Test Guide
Next
GEZE Powerdrive Sliding Door: Safety & Installation Guide

Leave a Comment

Your email address will not be published.