1. Mounting on Door
2. Wiring to Door Controller
- Power: + / - (12-24 V DC)
- Signal 1: COM / NC
- Signal 2: COM / NC
Note: Follow steps 1 through 7 for correct wiring.
3. DIP1 Settings
Configurations for A, B, and X.
- ON 1 2 3 4
- ON / OFF states
4. Teach-in
Perform the teach-in process (Duration: < 1 sec / > 3 sec).
5. Test + Adjustments
Check R1, R2 settings and verify operation with «click» confirmations.
6. Final Steps
Complete assembly using PZ1 tools. Verify all ON/OFF states.