6. Models
The ASSA ABLOY SW200 operator can be surface mounted and is suitable for the following installations:
- Single doors
- Double doors (two operators)
- Double egress doors (two operators)
The operators are non-handed and not dependent on the hinges. The operators suit both pushing and pulling arm systems.
6.1 Single Operator, Surface Mounted
The product is delivered complete with back plate, control unit, end plates, and cover. The standard length including end plates is CL = 716 mm.
(Pushing arm system shown in original documentation. Other lengths are optional.)
6.2 Double Operator, Surface Mounted
The product is delivered complete with back plate, control unit, end plates, and cover. Cover length CL is optional.
Two operators are mounted under the same cover to open one door each. The original documentation depicts a pushing and pulling arm system (double egress). It is also possible to use two pushing or two pulling arm systems.
- Full length cover.
- Modular cover using cover piece between two standard covers.
7. Part Identification
7.1 Surface Mounted - Side Loaded
Below is the detailed list of parts for the ASSA ABLOY SW200 operator system.
| Item No. | Description | Art. no. |
|---|---|---|
| 1 | Battery NiMH 12V/1.2Ah | 33738753 |
| 2 | EXU-SI kit for security & impulse | 331003554 |
| 3 | EXU-SA kit for safety | 331003557 |
| 4 | On/Off/Hold Open switch kit | 331003582 |
| 5 | Cable sync kit | 331003583 |
| 6 | Cable kit | 331009741 |
| 7 | Microswitch kit | 330000275 |
| 8 | Stop arm kit | 330000276 |
| 9 | Battery extension cable | 330000331 |
| 10 | Transmission unit | 331007291 |
| 11 | Fixing kit | 331007327 |
| 12 | CU-200 control unit | 331007752 |
| - | CU-200 control unit with EXU boards | 331008346 |
| 13 | Breakaway device | 331008600 |
| 14 | Microswitch breakaway | 331008610 |
| 15 | Encoder cable | 331009105 |
| 16 | Single cover | 331009683 |
| - | Double cover | 331009934 |
| 17 | Fixing for control unit CU-200 | 330000683 |
| 18 | Bottom end plate | 331003543 BK/SI |
| 19 | Battery assembly | 331007478 |
| 20 | LED cable | 331008615 |
| 21 | Top end plate | 331008749 BK/SI |
| 22 | Reset & Indication device | 331009828 |
| 23 | Adaptor kit | 330000270 BK/SI |
| 24 | PUSH arm service kit | 330000271 BK/SI |
| 25 | PULL/PAS arm service kit | 330000272 BK/SI |
| - | PULL/PAS arm service kit slim | 330000335 BK/SI |
| 26 | Fill cover kit | 331009513 BK/SI |
| 27 | Middle cap (2 pcs) | 331015578 BK/SI |
| 28 | Back plate | 331012753 |