9. Drive identification plate
Note: Only relevant in Germany and in the scope of validity of DIN 18650-1:2010-06.
Supplement classification code on the identification plate
GEZE GmbH
Reinhold-Vöster-Str. 21-29
DE-71229 Leonberg
Slimdrive SL NT
- Product identification data
- 12345
- 876
- Date of manufacture
- 07/2021
- Environmental Conditions
- Dry areas only
- Ambient temperature: 50 °C to -15 °C
- Compliance
- DIN18650-1:2010-06
- Code: 2 | 3 | 2 | 0 | _ _ _ | 0 | _ _ _ _ | 2
- Electrical Data
- Input: 230 V 50 Hz 0.65 A
- Output: 24 V 1 A
- Drive type
- Sliding door drive
- IP rating
- IP20
Safety devices on the drive (fifth character)
A distinction is made between three classes in terms of safety requirements:
- 1: Force limitation
- 2: Connection to external safety systems which have been approved by the drive manufacturer
- 3: Low-energy
Note: Several classes may be marked.
Safety at automatic door system – version/installation (seventh character)
A distinction is made between five classes of safety devices on door leaves:
- 0: No safety devices
- 1: With sufficiently dimensioned safety distances
- 2: With protection against crushing, shearing and drawing-in of fingers
- 3: With built-in turning fitting unit
- 4: With sensor-controlled protective devices
Note: Several classes may be marked.
Legend:
- Product name
- Serial number
- Electr. data
- Machine category
- Ambient temperature
- Only relevant in Germany and in the scope of validity of DIN 18650-1:2010-06: Classification code
- IP rating
- Date of manufacture
Slimdrive SL NT product family
10. Inspection of the installed door system (Page 34)
10.1 Protective measures to prevent and protect from hazardous areas
- Check protective earth connection to all metal parts that can be touched.
- Perform a safety analysis (risk analysis).
- Check the function of safety sensors and movement detectors.
Installation checklist Slimdrive SL NT
| No. | Testing / Item | On page | Completed |
|---|---|---|---|
| 1 | All cables laid correctly for the installation of the Slimdrive SL NT? | – | – |
| 2 | Track mounted? | 5.3 (9) | |
| 3 | Angled floor guide/continuous floor guide installed? | 5.4 (10) | |
| 4 | Moving leaf installed? | 5.5 (11) | |
| 5 | Drive components installed? | 5.6.1 (17) | |
| 6 | Tooth belt mounted? | 5.6.2 (17) | |
| 7 | Closing position for 2-leaf door system set? | 5.6.5 (19) | |
| 8 | Left and right module mounts connected to the power supply? | 6.1 (23) | |
| 9 | Tooth belt locking mechanism (optional) and control unit connected? | 5.6.10 (22) | |
| 10 | Safety devices mounted? | 6.3 (27) | |
| 11 | Switches/push buttons installed and correctly connected? | 6.4 (27) | |
| 12 | Programme switch installed? | 6.4 (27) | |
| 13 | Transformer earthing installed? | 5.7 (22) | |
| 14 | Earthing connections established? | 6.2.5 (26) | |
| 14b | 230/115 V connection established? | 6.1 (23) | |
| 15 | Cover earthing connected? | 6.2.5 (26) | |
| 16 | Cover catch mounted? | 6.2 (24) | |
| 17 | Safety analysis carried out? | – | – |
| 18 | Deviations of the door system checked in accordance with safety analysis? | – | – |
| 19 | Are all components mounted in accordance with the following instructions: | – | – |
| 20 | à Pre-mounting instructions Slimdrive SL NT | – | – |
| 21 | à Installation instructions Slimdrive SL NT – girder section and fixed panel | – | – |
| 22 | à Installation instructions protective leaf for sliding door drives | – | – |
| 23 | à Installation instructions safety leaf | – | – |
| 24 | Drive identification plate supplemented? |
Notes:
- à Only relevant for Germany and in the scope of validity of DIN 18650.
- à The identification plate may only be attached to the drive when installation has been checked for correct implementation using the checklist in accordance with GEZE specifications.