Green building documentation · Based on the SuPIM product information sheet (SuPIM-4144, issued 15.04.2024)
Specifying an automatic sliding door for a certified green building means more than picking an operator — you need documented environmental data that maps to your certification system. This article condenses the official SuPIM (Sustainable Products Information Module) declaration for the ES PROLINE sliding door drive system into the numbers and credit mappings that architects and sustainability consultants need for DGNB, BNB, LEED and BREEAM submissions.
1. Product identification
| Field |
Value |
| Product |
ES PROLINE automatic sliding door drive system |
| SuPIM declaration number |
SuPIM-4144 |
| Issue date |
15.04.2024 |
| Country / city of production |
Germany, 58456 Ennepetal |
| Useful life |
15 years (documented) |
| Assigned EPD |
EPD-DOR-20200269-IBA1-EN — specific EPD, IBU-verified |
The drive handles standard sliding doors, escape and rescue route doors, and telescopic sliding doors, moving door leaves of up to 400 kg. For full technical data (speeds, dimensions, locking devices, accessories), see our ES PROLINE technical guide.
2. Material composition
| Material group |
Share of product weight |
| Aluminium |
52% |
| Steel elements |
30% |
| Plastic elements |
7% |
| Electronic elements |
4% |
| Packaging material |
6% |
Why this matters: an 82% metal share (aluminium + steel) gives the product a high intrinsic recyclability at end-of-life, which directly supports DGNB criterion TEC 1.6 (deconstruction and recyclability) and circular-economy documentation.
3. Declarations and management system certifications
| Declaration type |
Designation |
Proof |
| Corporate Sustainability Report |
CSR (Corporate Sustainability Report) |
Web link |
| Environmental product declaration |
EPD (Environmental Product Declaration) |
EPD document |
| Health Product Declaration |
HPD (Health Product Declaration) |
Web link |
| Manufacturer's notifications |
Certified Environmental Management System (EMS): metals (steel, aluminium etc.) |
Manufacturer declaration |
| Certified Energy Management System |
Manufacturer declaration |
| Certified Occupational Health and Safety Management System |
Manufacturer declaration |
| Certified Quality Management System |
Manufacturer declaration |
The conformity of the manufacturer's declaration with the underlying evidence has been verified by IBU (Institut Bauen und Umwelt e.V.).
4. Certification system mapping
DGNB New Construction (2018)
| DGNB criterion |
ES PROLINE contribution |
| ENV 1.1 — Life cycle assessment of the building |
Environmental impacts documented in EPD EPD-DOR-20200269-IBA1-EN
|
| TEC 1.6 — Deconstruction and recyclability |
Reuse quality level: CE Bonus (reuse or material recycling); energy recovery: QS 1 |
BNB Buildings (2015)
| BNB criterion |
ES PROLINE contribution |
| 1.1.1 – 1.1.5 — Environmental impacts / LCA |
See EPD EPD-DOR-20200269-IBA1-EN
|
| 1.2.1 — Primary energy requirement |
See EPD EPD-DOR-20200269-IBA1-EN
|
LEED BD+C (v4)
| LEED credit area |
Supporting declaration |
| MR: Building product disclosure and optimization — material ingredients |
HPD (Health Product Declaration) |
| MR: Building product disclosure and optimization — environmental product declarations |
EPD |
| MR: Building product disclosure and optimization — sourcing of raw materials |
CSR (Corporate Sustainability Report) |
BREEAM International New Construction 2016 / BREEAM DE Neubau 2018
| BREEAM issue |
ES PROLINE contribution |
| Mat 01 — Environmental impacts of materials |
Certified EPD compliant with ISO 14025, EN 15804 / ISO 21930 |
| Mat 03 — Responsible sourcing of materials |
Manufacturer's certified management systems documentation |
5. End-of-life: European Waste Codes
| Waste stream |
European Waste Codes |
| Transport packaging |
15 01 01, 15 01 02 |
| Product packaging |
15 01 01, 15 01 02 |
| Product: production and installation |
15 01 01 |
| Product: end-of-life |
17 04 02, 17 04 05, 17 04 11 |
Specifying tip: when writing door automation into a DGNB/LEED/BREEAM specification, reference the EPD number EPD-DOR-20200269-IBA1-EN and SuPIM declaration SuPIM-4144 directly — auditors can trace both through IBU without additional manufacturer requests.
Conclusion
For green building projects, the ES PROLINE comes with a complete, IBU-verified documentation package: a specific EPD (ISO 14025 / EN 15804), HPD, CSR, four certified management systems, an 82% metal content with documented recyclability, and ready-made credit mappings for DGNB, BNB, LEED v4 and BREEAM. Combined with a documented 15-year useful life, it is one of the more straightforward door operators to defend in a sustainability audit.
Need EPD-ready door automation for a certified project?
DoorDynamic supplies OEM-compatible spare parts and operator solutions for automatic sliding and swing doors, and can support your specification with the right technical documentation. Tell us your certification system (DGNB, LEED, BREEAM) and door parameters — we will match the configuration and paperwork.
ES PROLINE is a product of dormakaba Holding AG; dormakaba, ES PROLINE and related marks are trademarks of their respective owner. DoorDynamic is an independent supplier of compatible spare parts and is not affiliated with or endorsed by the trademark owner. Data source: SuPIM product information sheet SuPIM-4144 (15.04.2024); verification by Institut Bauen und Umwelt e.V. (IBU). All data subject to change.
