9. Type Plate for the Drive
Note: Some details are only relevant in Germany and within the scope of validity of DIN 18650.
Manufacturer Information & Technical Specifications
GEZE GmbHReinhold-Vöster-Str. 21-29
DE-71229 Leonberg
Product: ECdrive T2
Type: Sliding door drive
Date of Manufacture 07/2021
Environment Dry areas only
Temperature Range -15 °C to +50 °C
Standard DIN 18650-1:2010-06
Power Input 230 V / 50 Hz / 0.65 A
Power Output 24 V / 1 A
Protection Rating IP20
Classification Code (DIN 18650)
Sample Code: 2 | 3 | 2 | 0 | _ _ _ | 0 | _ _ _ _ | 2
Safety Devices on the Drive (5th Character)
A distinction is made between three classes in terms of safety requirements:
- 1: Force limitation
- 2: Connection to external safety systems which have been approved by the drive manufacturer
- 3: Low-energy
Note: Several classes may be marked.
Safety at Powered Pedestrian Doors (7th Character)
A distinction is made between five classes of safety devices on door leaves:
- 0: No safety devices
- 1: With sufficiently dimensioned safety distances
- 2: With protection against crushing, shearing, and drawing-in of fingers
- 3: With built-in pivoting fitting unit
- 4: With sensor-controlled protective devices
Note: Several classes may be marked.
Type Plate Legend
- Product name
- Serial number
- Electrical data
- Machine category
- Ambient temperature
- Classification code (DIN 18650)
- IP rating
- Date of manufacture
10. Inspection of the Installed System
10.1 Measures to prevent or protect hazardous areas
- Check protective earth connection to all metal parts that can be touched.
- Perform a safety analysis (risk analysis).
- Check the function of safety sensors and movement detectors.
Mounting Checklist ECdrive T2
| No. | Test Step | Reference (Chapter/Page) | Done |
|---|---|---|---|
| 1 | All cables routed correctly for installation of the ECdrive T2? | -- | |
| 2 | Track mounted? | 5.4 / p.10 | |
| 3 | Angled floor guide/continuous floor guide installed? | 5.6 / p.11 | |
| 4 | Door leaf with single roller carriage installed? | 5.7.1 / p.13 | |
| 5 | Door leaf with double roller carriage installed? | 5.7.2 / p.15 | |
| 6 | Drive components installed? | 5.8 / p.19 | |
| 7 | Tooth belt mounted? | 5.8.2 / p.20 | |
| 8 | Closing position with 2-leaf System adjusted? | 5.8.4 / p.21 | |
| 9 | Left and right module mounts connected to the power supply? | 6.1 / p.24 | |
| 10 | Tooth belt locking mechanism (optional) and control unit connected? | 5.8.9 / p.23 | |
| 11 | Safety devices mounted? | 6.3 / p.29 | |
| 12 | Switches/push buttons installed? | 6.4 / p.29 | |
| 13 | Programme switch installed? | 6.4 / p.29 | |
| 14 | Transformer ground connected? | 5.8.10 / p.23 | |
| 15 | Ground connections completed? | -- | |
| 16 | 230 V connection established? | 6.1 / p.24 | |
| 17 | Cover earthing connected? | 6.2.5 / p.28 | |
| 18 | Cover fixing mounted? | 6.2.2 / p.26 | |
| 19 | Cover securing device mounted? | 6.2.4 / p.27 | |
| 20 | Safety devices mounted? | 6.3 / p.29 | |
| 21 | Additional switches and push buttons mounted? | 6.4 / p.29 | |
| 23 | Safety analysis carried out? | -- | |
| 24 | Deviations of the system checked in accordance with safety analysis? | -- | |
| 25 | Are all components mounted in accordance with the following instructions: | -- | |
| 26 | Pre-installation instructions ECdrive T2 | -- | |
| 27 | Installation instructions ECdrive T2 – girder section and side panel | -- | |
| 28 | Pre-installation and installation instructions GCtherm - fanlight | -- | |
| 29 | Pre-mounting instructions profile system leaves and side panel | -- | |
| 30 | Addition to the type plate of the sliding door drive complete? | p.37 / 9 |
Important Note: The type plate may only be attached to the sliding door drive if the assembly is checked for correct implementation according to GEZE specifications and using the check.