Next section
Next page: →The ED operators combine elegant design and innovative technology at the highest level. Their exclusive design not only ensures an aesthetically appealing appearance but also allows for space-saving integration into any door situation.
Key Features
- Slim design with an operator height of only 70 mm.
- Silver and white as standard colours; special colours available on request.
- The operator covers are available in fixed standard lengths, pre-assembled in customised lengths, or can be adapted on-site.
System Components & Configurations
- 01 Operator cover: Available in different designs, colours, and lengths.
- 02 Operator spindle: Customisable with extensions to the individual installation situation.
- 03 Door connection: Executed as slide channel, CPD slide channel, or scissor arm.
- 04 Pivot pin: Available in two lengths for slide channels.
- 05 Operator: Choice of two capacity versions: ED 100 or ED 250.
- 06 Operator with slide channel: Standard version in white.
- 07 Operator with arm: Version in white with integrated smoke detector/smoke detection control.
- 08 Operator with CPD arm: Version with door coordinator for 2-leaf door system in silver, with Vario cover and integrated smoke detector/smoke detection control.
Proven Silent Technology & Modular Configuration
Proven Silent Technology
The proven operator mechanism using force balancing technology is the key to reliable and silent operation.
- Operator units with two torque levels: ED 100 or ED 250, depending on door leaf size and weight.
-
Multi-stage operator:
- Optimum torque even under changing conditions, e.g., wind loads.
- Optimum durability and long service life, as only the required torque level is generated.
- Noise-optimised design.
Modular Configuration
The modular design of the ED operators allows for a wide variety of solutions.
- ED 100 operator: For doors with a maximum width of 1,100 mm.
- ED 250 operator: For large doors with a maximum width of 1,600 mm.
- Two single operators can be configured for a 2-leaf door system. The closing sequence is coordinated by the control unit or the ESR door coordinator.
- Depending on the operating mode “Pull door” (hinge side pull version) or “Push door” (opposite hinge side push version) and the lintel depth on-site, installation on the door will be realised with a slide channel or arm.
- Smoke detector with smoke detection control or emergency power supply can be integrated into the cover.
Valuable Details Inside: A Functional Solution for Every Requirement
All Basic Functions Included as Standard
The ED operators can be used as door closers, fully automatic operators, or for assisted opening. The standard version (low-energy operation) integrates all important functions for the safe operation of an automatic door system.
Easily Extend Functions as Required with Upgrade Cards
Depending on the area of application, higher speeds, special connection options, or predefined function profiles may be required. The ED operators’ range of functions can be easily customised with plug-in upgrade cards.
External Components for Control and Monitoring
External components can be connected to the central connection print. The connection options are diverse: from a simple manual release pushbutton for automatic door opening to a complex control for interlocking door systems in escape routes – ED operators have an open design with many interfaces.
Integrated Expansion Options
Options such as the ED UPS emergency power supply or RMZ smoke detection control with RM smoke detector are integrated in an extended operator cover. In addition to the appealing overall design of the system, installation and commissioning are also simplified by these components.
Internal Components Overview
- 01 Connection unit: Central connection print.
- 02 Power supply unit, motor and operator: Two performance classes ED 100 or ED 250.
- 03 Control board: Two performance classes ED 100 or ED 250.
- 04 Slot for upgrade cards: Customising the range of functions.
- 05 Operator interface: Easy set-up using information display.
- 06 Extension option: Integrated emergency power supply or integrated RMZ smoke detection control with RM smoke detector.