Next Section
Next page : →Warranty
ASSA ABLOY Entrance Systems warrants its products to be free from defects in material and workmanship under intended use and service for a warranty time of 12 months, beginning at time of delivery. This warranty extends only to the original buyer of the equipment.
ASSA ABLOY Entrance Systems warrants that the software will operate substantially in accordance with its functional descriptions and that it has been recorded on non-defective media.
Warranty Exclusions
The ASSA ABLOY Entrance Systems warranty does not apply to:
- Software to be error-free or operate without interruption
- General wear and tear on the system
- Fuse, disposable batteries, and glass damage
- System deviations caused by installers other than ASSA ABLOY Entrance Systems
- System that has been altered or damaged by vandalism or misuse
- System that has been additionally equipped with non-ASSA ABLOY Entrance Systems original branded parts and/or spare parts
- Unrequired visits due to poor client communication (e.g., door working when our technician arrives, reset, power discontinuation)
- Adjustments (closing and opening speed and also detection field radars) due to customer requests (excludes operational adjustments thought to create a hazard)
- Water damage
- Adverse weather conditions
- Any damage caused, directly or indirectly, by a circumstance beyond the control of the applicable company within ASSA ABLOY Entrance Systems, such as industrial dispute, fire, natural disaster, war, extensive military mobilization, insurrection, requisition, seizure, embargo, restrictions in the use of power, and defects or delays in deliveries by sub-contractors caused by any such circumstances.
- Non-compliance with manufacturer's care and maintenance recommendations may void the warranty.
- ASSA ABLOY Entrance Systems authorized resellers shall extend this warranty to end-users only, but have no authority to extend a greater or different warranty on behalf of ASSA ABLOY Entrance Systems.
- A service agreement with ASSA ABLOY Entrance Systems will help secure the availability of a fully operational system and will give priority at call-out, thus minimizing the time that the equipment is unusable.
Service
Regular inspections by a trained and qualified person, and the frequency of service occasions, should at minimum be made according to national regulations or industry standard, in the absence of a national regulation.
This is especially important when the installation concerns a fire-approved door or a door with an emergency-opening function.
To extend the life of your investment and ensure safe and reliable operation of the door, we recommend a minimum of 2 visits per year or more, depending on usage and operating conditions. Environmental aspects shall also be considered.
As your entrances are part of your business flow, there’s every reason to keep them working well. ASSA ABLOY Entrance Systems offers you maintenance and modernization expertise to rely on. Our Maintenance Programs and Modernization Services for entrance automation are backed by extensive expertise for all types of pedestrian and industrial door and docking systems, independent of brand.
At your disposal is a team of dedicated expert technicians, proven through decades of maintenance, service, and satisfied customers.
Intended Use
The Besam SL500, Besam SL500 T, and Besam SL500 SL are automatic sliding door operators developed to facilitate entrances to buildings and within buildings through sliding doors.
The door is designed to offer continuous use, a high degree of safety, and maximum lifetime. The system is self-adjusting to the effects caused by normal variations in the weather conditions and to minor friction changes caused by e.g. dust and dirt.
Emergency Functions
In emergency situations, the doorset is opened and remains open automatically. It may also be equipped with a break-out function, in which case the door leaf is pushed manually open in the escape direction.
Dual batteries and motors are used in escape routes as indicated in associated certificates. (See "Electrical emergency unit with batteries" and "Electrical emergency unit with batteries and two motors" in the full manual). For manual break-out, see "Break-out unit PSB".
It is to be used indoors where it is suitable for almost all types of external and internal sliding doors.
Safety Note: Ensure that the lock is only activated when there are no persons in the room.
Technical Specifications
| Manufacturer | ASSA ABLOY Entrance Systems AB |
|---|---|
| Address | Lodjursgatan 10, SE-261 44 Landskrona, Sweden |
| Type | Sliding Door Operator Besam SL500, Besam SL500 T, and Besam SL500 SL |
| Mains Power Supply | 100 V AC -10% to 240 V AC +10%, 50/60 Hz, fuse 10 AT |
| Power Consumption | Max. 250 W |
| Degree of Protection | IP20 |
| Approvals | Third party approvals from established certification organizations valid for safety in use, see Declaration of Conformity. |
How It Works
The Besam SL500, Besam SL500 T, and Besam SL500 SL work electromechanically.
The motor, control unit, transmission – and optional emergency unit and electromechanical locking device – are all assembled in a support beam with an integrated cover.
- The motor and gear box transmit movement to the door leaves by means of a tooth belt.
- The door leaf is fitted to a door adapter/carriage wheel fitting and hangs on a sliding track.
- The guiding at the bottom is carried out by means of floor guides (Full Break-Out) or Side Panel Guides (Fixed Sidelites).
Operation Cycle:
- When an OPENING IMPULSE is received by the control unit, the motor starts and transmits movement to the door leaves, which move to the open position.
- The closing starts when no OPENING IMPULSE is received and the HOLD OPEN TIME has expired.
The user can select five different modes of operation if a programme selector is installed.
Locking & Unlocking
Locking
Doors used for emergency escape in buildings such as hospitals and homes for elderly people may not be locked or put in programme selection OFF mode. In other buildings, emergency escape doors may be locked or put in programme selection OFF mode after it has been secured and all people have left the building.
Unlocking
Unlock all the mechanical locks before activating the operator.