9. Drive Type Plate
Note: Only relevant in Germany and within the scope of validity of DIN 18650-1. Add the classification code to the type plate.
GEZE GmbH
Reinhold-Vöster-Str. 21-29
DE-71229 Leonberg
Type Plate Specifications
1. Product Name
Powerdrive (Sliding door operator)
2. Serial Number
000000000000
12345 / 876
12345 / 876
3. Electr. Data
Input: 230 V, 50 Hz, 0.87 A
Output: 24 V, 1 A
Output: 24 V, 1 A
4. Machine Category
Dry areas only
5. Ambient Temperature
-15 °C to 50 °C
6. Classification Code (DIN 18650-1)
2 | 3 | 2 | 0 | _ _ _ | 0 | _ _ _ _ | 2
7. IP Rating
IP20
8. Date of Manufacture
49/2021
Safety Classifications
Safety devices on the drive (fifth character)
A distinction is made between three classes in terms of safety requirements:
- 1: Force limitation
- 2: Connection to external safety systems which have been approved by the drive manufacturer
- 3: Low-energy
Note: Several classes may be marked.
Safety for automatic door systems – version/installation (seventh character)
A distinction is made between five classes of safety devices on door leaves:
- 0: No safety devices
- 1: With sufficiently dimensioned safety distances
- 2: With protection against crushing, shearing and drawing-in of fingers
- 3: With built-in turning fitting unit
- 4: With sensor-controlled protective devices
Note: Several classes may be marked.
10. Inspection of the installed door system
10.1 Measures to prevent and secure hazardous areas
Check protective earth connection to all metal parts that can be touched.
Perform a safety analysis (risk analysis).
Check the function of safety sensors and movement detectors.
Assembly Check List: Powerdrive Product Family
| No. | Testing Task | On Page | Completed |
|---|---|---|---|
| 1 | All cables routed correctly for installation of the Powerdrive? | – | |
| 2 | Track mounted? | 5.28 | |
| 3 | Angled floor guide mounted? - Angled floor guide, floor mounting (option) - Angled floor guide wall installation (option) |
5.3.1 5.3.3 |
|
| 4 | Continuous floor guide mounted (option)? | 5.3.4 | |
| 5 | Moving leaf installed? | 5.4 | |
| 6 | Drive components installed? | 5.5 | |
| 7 | Tooth belt mounted? | 5.5.1 | |
| 8 | Tooth belt locking mechanism (optional) and control unit connected? | 5.7 | |
| 9 | Safety devices mounted? | 6.3 | |
| 10 | Switches/push buttons installed and correctly connected? | 6.4 | |
| 11 | Programme switch installed? | 6.4 | |
| 12 | Transformer ground fitted? | 5.8 | |
| 13 | 230/115 V connection established? | 6.1 | |
| 14 | Cover earthing connected? | 6.2.3 | |
| 15 | Cover fixing mounted? | 6.2.1 | |
| 16 | Safety analysis carried out? | – | |
| 17 | Deviations of the door system checked in accordance with safety analysis? | – | |
| 18 | Are all components mounted in accordance with all instructions? | – | |
| 19 | - Pre-installation instructions for the Powerdrive product family | – | |
| 20 | - Installation instructions Powerdrive – girder section and side panel | – | |
| 21 | - Pre-installation instructions profile system leaves and side panel | – | |
| 22 | - Installation instructions protective leaf for sliding door drives | – | |
| 23 | - Installation instructions safety leaf | – | |
| 24 | Type plate added to the drive? | 9 |
Notes for Final Assembly:
- Only relevant for Germany and within the scope of validity of DIN 18650-1.
- The type plate may only be attached to the drive if assembly was also checked for correct completion according to the GEZE specifications using the check list.