Next Section
Next Page: →Installation profiles
A profile for 100 mm and 150 mm height, for corridor or wall fixing, guarantees adaptation for all possible applications. The mechanical basic system, with a low number of components, is the same for both heights.
100 mm height
- Profiles for corridor installation
- Profiles for wall fixing
- LM rail
- Basic drive profile
- Interior cover
- Wall fixing profile
- Service cover holder
150 mm height
- Profiles for corridor installation
- Profiles for wall fixing
- LM rail
- Basic drive profile
- Interior cover
- Wall fixing profile
- Service cover holder
MiniDriveUnit: the heart of the ES 200 Easy
The prefabricated MiniDriveUnit, with all the electrical components necessary, is industrially tested and facilitates the assembly and maintenance of drive units.
The control unit has proven its worth a thousand times in all imaginable fields of application throughout the world.
Components
| No. | Component |
|---|---|
| 1 | MiniDriveUnit |
| 2 | Transformer |
| 3 | Motor |
| 4 | Decoder |
| 5 | Control unit EC2 |
| 6 | Run and installation profile |
| 7 | Battery pack (optional) |
| 8 | Carriage |
| 9 | Deflection roller |
| 10 | Service cover holder |
| 11 | End stopper |
| 12 | Door suspension with adjustment device |
| 13 | Belt connection |
The drive for individual door design
Door variants are shown as corridor installation with an LM rail. See the installation profiles section for profiles for wall fixing.
100 mm installation height
Special “profile” version.
- MANET single-point fixings
- Fine-frame profiles G glass clamping rail
- Double-glazing profiles, type G-FLEX
- Standard frame profiles, type R
150 mm installation height
Special “heat insulated profile” version.
- Thermo profiles
- Double-glazing profiles, type G-FLEX
- Standard frame profiles, type R
- MANET single-point fixings
- Fine-frame profiles G glass clamping rail