GEZE ECturn DPS Program Switch Replacement
GEZE ECturn DPS Program Switch for Professional Replacement Projects
The GEZE ECturn DPS is a field-proven GEZE DPS switch for operating mode selection in automatic door systems.
This page is built for buyers looking for a precise GEZE program switch match, including replacement-driven searches such as GEZE ECturn replacement and GEZE DPS replacement.
For platform-level product discovery, you can also review the GEZE ECturn collection before confirming this specific model.
Technical Specifications & Part Numbers
Core technical data and identification points for engineering teams and procurement checks.
- Product Type: GEZE DPS display programme switch
- Application: Operating mode selection for GEZE ECturn automatic door systems
- Manufacturer Article Number: 155809
- Related Legacy Reference: 103940 (replacement context)
- Control Note: OFF push button is not assigned (per provided manual content)
- Fault Display Behavior: Fault message appears about every 10 seconds on the display programme switch
Compatibility & Selection Guidance
Buyers often search by multiple naming patterns including GEZE DPS, GEZE DPS 155809, ECturn DPS, and ECturn program switch.
This unit is suitable where a display-based selector is required, including GEZE DPS display use cases in maintenance and refurbishment workflows.
If you are selecting by system family first, compare with other GEZE ECturn options to avoid mismatch between controller generation and field hardware.
Technical & Troubleshooting Support
This section targets high-intent queries such as GEZE DPS manual, GEZE DPS error codes, and GEZE DPS troubleshooting, based only on the provided official manual excerpt.
Display Programme Switch Manual: Core Operation Rules
- Mode selection: Touch the required operating mode on the display programme switch; the selected mode is shown on the display.
- OFF button status: The OFF push button is not assigned.
- Service action: When a fault appears, record the fault number and notify a service technician.
Key-Operated SCT Function
- SCT short press (first): Enables operation of the display programme switch.
- SCT short press (again): Disables operation of the display programme switch.
- Blocked operation indicator: Two horizontal dashes are shown briefly when operation is blocked.
Error Codes / Field Messages
| Code | Meaning | Troubleshooting Method |
|---|---|---|
| Fault number (shown about every 10 seconds) | Door system fault is present and displayed cyclically | Record the number, check the full service-manual fault section, escalate to technician support |
| -- (two horizontal dashes) | Operation blocked due to active block/interlock condition (status indicator, not a fault code itself) | Check and remove active block condition, retry mode switching, re-enable via SCT if required |
If the verification and reset steps above do not clear the issue, the hardware may have irreversible damage.
In that case, replacement with a new unit is recommended to restore stable operation and reduce downtime risk.
FAQ for Buyers and Installers
Is this the same as a GEZE DPS 155809 unit?
Yes, this page is mapped to manufacturer article number 155809, commonly searched as GEZE DPS 155809.
Is this suitable as a GEZE ECturn replacement part?
It is positioned for GEZE ECturn replacement scenarios, especially where a display programme switch format is required.
Where can I review the broader ECturn range before ordering?
You can review the full GEZE ECturn collection and then return to this product for final model confirmation.