BEA IXIO-DT1

Dunkermotoren GR 63×55 Brushed DC motor assembly, manufactured by Dunkermotoren.

  • GR 63×55 30V motor
  • Worm gearbox SG80K
  • Encoder RE20S
  • Gear ratio 15:1
提出问题

BEA IXIO-DT1

* 必填字段

尺码指南 共享
BEA IXIO-DT1

BEA IXIO-DT1

正常价格 $0.00
销售价格 $0.00 正常价格
单价
DESCRIPTION

TABEL OF SPECIFICATIONS

Detection Mode
Motion Minimum detection speed: 2 in/s
Presence Typical response time: < 200 ms (max: 500 ms)
Technology
Microwave Doppler Radar Transmitter frequency: 24.150 GHz
Transmitter radiated power: < 20 dBm ERP
Transmitter power density: < 5 mW/cm²
Active Infrared with Background Analysis Spot size: 2" × 2" (typical)
Number of spots: max. 24 per curtain
Number of curtains: 2
Mounting Height
6'6" – 11'6"
Local regulations may impact acceptable mounting height (pedestrian applications only)
Sensor Temperature Range
-13 – 131 °F
0 – 95% relative humidity, non-condensing
LCD screen is operational from 14 – 131 °F.
The sensor may still be programmed in colder temperatures, but with the remote control.
Output
Relay 1 Electromechanical relay (potential and polarity free)
Max. contact current: 1 A
Max. contact voltage: 30 VAC
Adjustable hold time: 0.5 – 9 s
Relay 2 Solid-state relay (potential and polarity free)
Max. contact current: 100 mA
Max. contact voltage: 42 VDC / 30 VAC
Test/Monitoring Input
Sensitivity Low: < 1 V
High: > 10 V (max. 30 V)
Response time on test request Typical < 5 ms
Supply Voltage
12 – 24 VAC ±10%
12 – 30 VDC ±10%
To be operated from SELV-compatible power supplies only
Power Consumption
< 2.5 W
Noise
< 70 dB
Degree of Protection
IP54
FCC Certification
FCC G9B-100606
IC 4680A-100606
Compliance
ISO 13849 PL «C» CAT. 2 (under the condition that the door control system monitors the sensor at least once per door cycle)

Recently Viewed Products